
745T-20CTwenty (20) Channel Digital Delay Generator
Model 745T-20C Digital Delay Generator는 20 개의 독립적 인 펄스 지연 및 폭 채널을 사용자에게 제공합니다. 이 다중 채널 디지털 지연 생성기는 옵션 1 피코 초 (ps) 해상도로 100 피코 초 (ps)의 지연 해상도를 제공합니다. 내부 또는 외부 트리거가있는 지터는 25ps 미만입니다.
Overview
모델 745T-20C는 모든 TTL 애플리케이션을 충족하면서 최대 6V를 50Ω으로 제공합니다. 레벨은 채널별로 조정 가능하므로 시간과 진폭 도메인을 완벽하게 제어 할 수 있습니다. 상승 시간이 1ns 인 빠른 출력은 후면 패널에있어 복잡한 실험을 우아하게 보여줍니다. 전면 패널 컨트롤은 원격 제어를위한 여러 프로그래밍 옵션 (이더넷 등)이있는 터치 스크린 인터페이스를 통해 액세스 할 수 있습니다.
모든 매개 변수 (지연 / 진폭 / 폭 / 트리거)는 Internet Explorer, Firefox 또는 Chrome과 같은 HTML 브라우저에서 10 또는 100 Mb / s 속도로 열리는 내장 GUI로 제어 할 수도 있습니다.
모델 745T-20C는 나노초 및 피코 초 영역에서 많은 실험을 게이트, 지연, 펄스 및 동기화하는 데 고유합니다. 공간 절약, 캘리브레이션 비용 절감 및 수많은 채널의 간단한 제어는 여러 채널의 타이밍 사용자에게 이상적입니다.
The Model 745T-20C Digital Delay Generator offers users several options for triggering timing channels: External, Internal and Remote. Externally trigger on the positive slope. The internal rep rate generator may be started by front panel pushbutton or remotely via your software interface. Either trigger mode may be set in one-shot or repetitive.
The Model 745T-20C can be expanded to provide up to 60 channels, all with the same high performance. *Note: external triggering is not available for 40 / 60 channels.
Delays
Number of Channels | 20 independent delay outputs |
Range | 0 to 10 s |
Resolution | 100 ps (standard) 1ps (option 4) |
RMS Jitter | 25 ps (T0 to any output) |
Accuracy | < 250 ps + delay x 10-7 |
Time Base | 0.05 ppm stability |
Trigger source
Internal | 3 generators 0.1 Hz to 10 kHz in 1-2-5 sequence |
External | Rate up to 50 kHz, 1 V/50 Ω Threshold, slope positive; 5 ns minimum pulse width |
Command | 2 Single Shots |
Outputs T1 to T20
Amplitude | Adjustable 3 V to 6 V into 50 Ω |
Rise/Fall time | 5 ns/ 5 ns |
Width | 100 ns to 300 ms |
Polarity | Active Low / Active High |
Connector | BNC |
Clock Input (1) | 10 MHz to 100 MHz (customer choice fixed input) |
General
Interface Control | Front panel, Ethernet / Internet (web page or SCPI) |
Software | Free Drivers |
Dimension Weight | Rack 19″ 2U 19″W x 3.5″H x 12″D [48.25mm x 8.9mm x 30mm] *with mounting ears |
Power | Autovolt 90 to 220 Vac / 0.5 Amp |
Option 1 | Output 10V (2) Amplitude = 2.5V to 10V, rise/fall time = 1ns/3ns into 50 Ω, width = 100ns to 10ms |
Option 2 | Output 20V (2) Amplitude = 5V to 20V, rise/fall time = 3ns/15ns into 50 Ω, width = 0.1us to 10us |
Option 3 | Output 32V (2) Amplitude = 32V Fixed, rise/fall time = <3ns/ <15ns into 50 Ω, width = 1us Fixed |
Option 4 | 1ps Delay Resolution [<10ps RMS Jitter from T0 to Ch 1 to 10 and < 20ps Jitter from T0 to Ch 11 to 20 |
Option 5 | Optical Output [850 nm with ST Connector] |
Option 6 | Clock Input and Output Frequency 10 MHz to 100 MHz |
Option 7 | 40 Channels — Two 754T-20 Synchronized and fine tuned at factory |
Example How to Configure
Step 1: Choose Resolution | 100ps or 1ps |
Step 2: Choose Clock Frequency | 10MHz or 100MHz or custom* |
Step 3: Choose Output Frequencies | *dependent on Clock Frequency |
Step 4: Choose Output Pulse Amplitude | TTL (Standard) 2.5 V to 10 V, Square 5 V to 20 V 32 V (4 Channel Max) |
Software, firmware and drivers
Software, firmware and drivers are available to our registered users. To view pricing for this and other products, please log in or create a free account.